Menvier Security TS700 Manual do Utilizador descarregar pdf (Página 6)

8. Unsetting

Enter the premises via t he normal entry route and go directly to

the keypa d. En ter your passcode. The display will show “OPEN”

and then revert to displaying the current time. The sounder will

sound at entry and will stop when the system is unset. If the entry

time is exceeded an internal alarm is generated and the entry

timer is restarted. If at the end of the second entry timer the

system has not been unset a full alarm will occur.

9. Unsetting after an Alarm

Enter the premises via t he normal entry route and go directly to

the keypad.Enter yourpasscode.The sounderwillsound atentry

andwills top when the passcode isentered.The display willshow

the circuitthatcausedthe alarmandthesystemmustbereset.

10. Resetting after an Alarm

Your system is programmed a s EITHER User Reset or Engineer

reset, consult your installation company if you are not sure.

User Reset

1. Enter your passcode.

2. Press ] within 5 seconds.

3. The display will show “OPEN” and then revert to the current

time.

Engineer Reset

1. Enter your passcode.

2. Press ] within 5 seconds.

3. The “CALL ENGINEER” message is displayed and the

engineer must now be called to reset the system.

Remot e Reset

1. Enter your passcode followed by [ within 5 sec onds.

2. The display will show “USER 1-”.

3. Press 3, the d isplay will show a four digi t "seed" co de.

4. Te lephone your central station or installation company and

quote the “ seed” code. They will quote you a fo ur digit

“Reset” code in return.

5. Enter the “Reset” code and press [. A low tone indic ates

the “Reset” code was ei ther incorrect or incorrectly entered.

A high tone indicates the c ode was accepted.

6. Press ] to return to the “OPEN” condition.

TS700 Sta rburst User Operating Instructions

0023

Ent er passcode before entry

timer expires.

OPEN

System is now u nset (OPEN).

ALARM 0 3

Circuit Alarm 03.

OPEN

System is now reset.

CALL

ENGINEER

System requires an engineer to

reset or Remote Reset.

USER 1-

“User Menu 1" selected.

8302

The four digit “seed” code.

Note: This code is only an

example.

2843

The four digit “Reset” code

entered.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentários a estes Manuais

Sem comentários

Menvier Security TS700 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Menvier Security TS700