Menvier Security TS790+ Especificações descarregar pdf (Página 23)

TS790+ & TS900+ Installation Manual System Installation

Using the DATAC / RS232 Printer

1. Plug the DCI/MPA on to the PRINTER plug

(JP1) on the main control panel PCB.

2. Plug the other end of the DCI/MPA into the

DATAC or RS232 printer.

3. In order for the printer to work correctly

ensure the printer is set to the following:

Baud rate = 4800

Parity = None

Start bits = 1

Stop bits = 2

Data bits = 8

DTR = Normal

4. When set-up correctly the system program

details and event log can be printed.

5. When finished unplug the MPA/DCI. If the

printer is left connected events will be

printed as and when they occur.

Figure 23. Printer Connections

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 69 70

Comentários a estes Manuais

Sem comentários