Menvier Security TS900+ Especificações descarregar pdf (Página 6)

Remote Keypads

Up to 4 remote keypads can be connected to the

control panel. Each remote keypad has two

detection circuits and a single switched -ve

output. There are four types of remote keypads

that can be used:

32 Character LCD (NETLCD)

The NETLCD remote keypad has a backlit 32

character super-twist Liquid Crystal Display (LCD)

and a backlit tactile rubber keypad. When using

the LCD Keypads the text for user codes, part

setting modes and circuit identification can be

programmed to make the operation and

programming of the system easier.

8 Character Starburst (NETSTAR)

The NETSTAR remote keypad has a backlit 8

character starburst display (LCD) and a backlit

tactile rubber keypad.

4 Character LED (NETLED)

The NETLED remote keypad has a 4 character LED

display and backlit tactile rubber keypad. When

using the LED remote keypads, text cannot be

programmed but all other system functions are

available.

Remote Arming Station (NETARM)

The Remote Arming Station only allows setting and

unsetting of the system. The unit has two indicator

LEDs, the “Power LED” and a programmable

“Function LED” (the “Function LED” may be

programmed as “Fault” or “Area Set” etc.).

TS900 NODE

The TS900 Node provides eight programmable

detection circuits and two programmable outputs

(Can only be used on the TS900).

ID Node (TS900.IDNODE)

The TS900 ID NODE can be used as an alternative

to the standard TS900 Node. It provides a single ID

Detector Loop for connection to 30 ID devices

and 8 programmable outputs. Several

configuration options allow it to be used on its own

or with existing TS900 Nodes. (Can only be used on

the TS900.)

TS700 LEC

The Local Expansion Card (LEC) provides two

programmable detection circuits and one

programmable output.

Specifications

General

Zones TS790 - 10 to 16

TS900 - 10 to 56

Expansion 2 zone LECs and/or Keypads

8 zone Nodes (TS900 only)

30 zone ID Node (TS900 only)

Outputs (Panel) 12 + 8 via plug-on digicom

Keypad types 32 Character LCD

8 Character Starburst LCD

4 Character 7-segment LED

LED Arming station

Electrical

Mains Input 230 ±10% 50Hz ±5%

Control Panel 220mA (normal)

300mA (alarm)

Battery 12V 7Ah Sealed Lead Acid

Power Supply 1.5A

LCD keypad 50mA (normal) 60mA (alarm)

Starburst keypad 50mA (normal) 60mA (alarm)

LED keypad 60mA (normal) 70mA (alarm)

Arming Station 30mA (normal) 40mA (alarm)

TS900 Node 60mA (normal) 60mA (alarm)

ID Node 80mA (with 1 device)

160mA (with 30 devices)

TS700 LEC 30mA (normal) 30mA (alarm)

Physical

Control panel 384(W) x 312(H) x 95(D)mm

4.9Kg

Remote Keypads 150(W) x 104(H) x 30(D) mm

282g

Nodes (all types) 128(W) x 182(H) x 34(D) mm

370g

TS700 LEC 142(W) x 82(H) x 36(D) mm

213g

Environment -10 to 55°C

Overview TS790 & TS900 Installation Manual

1 2 3 4 5 6 7 8 9 10 11 ... 67 68

Comentários a estes Manuais

Sem comentários

Menvier Security TS900+ Especificações Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Menvier Security TS900+