Menvier Security TSD401 Manual do Utilizador descarregar pdf (Página 4)

Menvier Security

Kenn Road Clevedon Avon BS21 6LH

Tel 01275 870078 Fax 01275 343453

E.Mail http//:www.menviersecurity.co.uk

TECHNICAL BULLETIN

No. TSD401/001/3/95

TSD401 CONTROL PANEL

Symptom

When the TSD401 is triggered into an alarm condition, the dialler is activated and the unit will

proceed to dial the first telephone number. If a valid passcode is entered whilst the unit is

dialling, there is a remote possibility that the dialler may subsequently dial incorrectly.

Solution

To check whether this has ever occurred, play-back any of the recorded messages and if a

continuous tone is superimposed over the original message, the dialler may not dial correctly.

If this is the case, proceed as follows:

1. Remove all power from the system (mains and battery), then re-apply all power.

2. Select 'Speech Dialler' programming and re-record all messages.

3. Re-program all stored telephone numbers to 'Pulse' dial (see page 17 of the User Manual)

and exit 'Speech Dialler' programming.

However, if the message does not have a continuous tone superimposed over it, simply

perform step 3 of the above action.

All TSD401's after serial number

'97F12100'

will not require the above action.

1 2 3 4 5 6 7 8 9 ... 25 26

Sem comentários

Menvier Security TSD401 Manual do Utilizador Página 4