Menvier Security TS400 Manual de Instruções descarregar pdf (Página 28)

Re-arm Options 1 re-arms (1)

When an alarm occurs, the internal and external sounders are

operated for the length of the bell duration. At the end of this

time the alarm is silenced and the all zones are re-armed. Any

zones that are active will be automatically isolated until they

return to their healthy state. If an alarm occurs from the same

zone it will cause the internal and external sounders to operate

again, at the end of the alarm the zone is "Locked-out" and

prevented from generating another alarm. All other healthy

zones will re-arm and will only be "Locked-out" when they have

caused another alarm.

3 Re-arms (3)

Operates as above, but zones are only "Locked-out" after the

system has re-armed 3 times.

Key Switch Options AWAY (A)

When key switch zone is opened the exit procedure for AWAY set

will start and when exit timer has expired or the Final Exit zone is

operated the system will be full set. When the zone is closed the

system will unset.

HOME (H)

When the key switch zone is opened the exit timer will start and

when the timer has expired the system will be part-set. When the

zone is closed the system will unset.

RST Output Options Switched 12V (S)

This may be connected to the "Latch" input on latching

detection devices (such as PIR's).

Detector Reset (D)

This may be used as the 0V connection to detectors that require

the power to be removed to reset them (such as Smoke

detectors and Vibration Sensors).

Part-set Final Exit

Options

Final Exit (E)

When the system is part-set (HOME) the Final Exit zone will start

the entry procedure if activated.

Night (N)

When the system is part-set (HOME) the Final Exit zone will cause

a full alarm if activated (i.e., the Final Exit becomes a Night zone

when the system is part-set).

Programming TSD402 Installation Manual

1 2 ... 23 24 25 26 27 28 29 30 31 32

Sem comentários

Menvier Security TS400 Manual de Instruções Página 28